30*45cm polyester material Russian car flag with pole
You are here:russianfederationflagcom > Products > Russian Flags > 30*45cm polyester material Russian car flag with pole

30*45cm polyester material Russian car flag with pole

Russian Flags

Theflag of Russiais atricolourflagconsisting of three equal horizontal fields:whiteon the top,bluein the middle, andredon the bottom. The flag was first used as an ensign for Russian merchant ships and became official as the flag of theTsardom of Rus.

detailed information

The flag of Russia is a tricolour flag consisting of three equal horizontal fields: white on the top, blue in the middle, and red on the bottom. The flag was first used as an ensign for Russian merchant ships and became official as the flag of the Tsardom of Russia in 1696. It remained in use until the establishment of the Russian Socialist Federative Soviet Republic (RSFSR) in 1917.

During the Soviet Union's existence, it used a flag with a red field with a golden hammer and sickle and a golden bordered red star on top. With the dissolution of the Soviet Union, the pre-revolutionary tricolour was re-introduced as the flag of the Russian Federation in 1991 in the 1:2 ratio. The Tsarist tricolour was fully restored as the current flag in 1993 after the constitutional crisis.



1. MaterialRussian Federation Flag
*Polyester68D(60g); 100D(75g)
*Spun-Poly/Wool-Like300D(116g); 600D(160g)
*OthersSatin; Satin-Knitted Polyester; Oxford; Non-Woven; Twill(Uniform) fabric
2.ColorPANTONE Color System; CMYK; Solid Color; Spot Colour; Gradient Color
3. SizeCustomized/Any size can be made;Normaly size is 3'x5'; 4'x6'; 2'x3'; etc.
4. Printing SkillSilk Screen Printing; Digital Printing
*Silk Screen Printingsingle layer, 100% back side image penetration
*Digital Printingsingle layer, 80% back side image penetration

two confederate printing bannerss sewing together, with or without black-out lining
5. LogoCustomized/Any design can be made/AI or PDF artwork need to be provided
6. Accessory/AttachmentCustomized/Any accessories can be made on the confederate printing banners
*BasicGrommet; Eyelet; Pole; Rope; Toggle; Hook; Clip; Loop; Strings; etc.
*OthersLabel; Hang tag; Cardboard; Adhesive Sticker
7. Sleeve/Pole PocketWhite; Black; Same color as the confederate printing banners; etc.
8. Stitchesdouble sewing lines; Single sewing lines; Four sewing lines; Corner reinforcement; etc.
  1.        The flag material is 100%polyester woven fabric or  knitted fabric

  2.        The flag size will be 75cm*150cm, or 90cm*180cm or other customized size

  3.        The trim will be metal grommets, D ring or rope and stick and so on.

  4.         Low MOQ is acceptable.


Hot Selling Series:


Application:

technology


1.Embroidery star. Silk Screen Printing, Heat Transfer, Digital Printing, Sublimation Printing etc

2.Flag Material: 100% nylon, 100D/150D/300D 100% Polyester, 110g Knitted Polyester, 160gsm Woven Polyester, Cotton, Vinyl, Nylon, Satin, Canvas, etc

3.Single or double sides printed, Color fadeless

4.Perfect for large outdoor games, football games, and other activities.

5.Welcome customized Size, printing, design, Material, etc

 


Powered by russianfederationflagcom RSS Map HTML Map

Copyright 站群 © 2013-2022 All rights teserved Povered
russianfederationflagcom-30*45cm polyester material Russian car flag with pole